Mira USB Aroma Diffuser

Elegant Ceramic Wax Melt & Essential Oil Burner

Fill your home with tranquil fragrance and soft, ambient light. These timeless ceramic burner creates a serene glow while gently diffusing your favourite wax melts and essential oils.

Highlights & Benefits

• Ambient, Glowing Design Each thoughtfully crafted silhouette catches the flicker of candlelight to cast a warm, gentle glow across your space. Its modern, understated aesthetic effortlessly complements living rooms, bedrooms, or dedicated self-care corners.
• Dual-Use Aromatherapy Seamlessly designed for both scented wax melts and essential oils. Whether you are diffusing pure oils for an evening wind-down or melting home wax cubes, the generous dish depth holds your fragrance comfortably for hours of balanced scent throw.
• Gentle, Consistent Heat The carefully proportioned chamber allows an unscented tealight to warm the dish evenly, keeping the temperature controlled so your fragrances diffuse naturally without burning.
• Effortless to Use & Maintain Add a single wax melt cube (or clean water with 3–5 drops of essential oil) to the top dish. Place an unscented 4-hour tealight in the base and light gently. Allow the soothing fragrance to fill your room, extinguishing when done.

The Candle Warmer gently melts jar candles from the top down using a dedicated warming bulb, diffusing long-lasting fragrance without an open flame, smoke, or soot.   

Step-by-Step Instructions

1. Set Up the WarmerPlace the warmer on a flat, level, and heat-resistant surface away from drafts, fabric, and flammable items.   Ensure the unit is unplugged before setup.   
2. Install the Warming BulbAlign the pins of the included GU10 35W halogen bulb with the sockets inside the shade.   Push gently and twist clockwise until locked securely in position.   
3. Position Your Jar CandleRemove the lid from your scented jar candle.   Place the candle centrally on the base beneath the lamp shade.   Ensure there is at least 6 cm of clearance between the top of the candle and the bottom of the shade/bulb.
4. Power On & Customise SettingsPlug the adapter into a mains wall outlet and switch it on.   Adjust Warmth & Fragrance Throw: Use the inline controller/dimmer switch (+ / -) to adjust the light intensity. A higher setting warms wax faster for a stronger scent throw; a lower setting provides subtle diffusion and gentle ambient light.   Set the Timer: If your controller model features a timer, choose between 2, 4, or 8 hours for automatic shut-off.   
5. Let the Melt Pool FormWithin 10–15 minutes, an even melt pool will form across the surface of the wax, releasing the fragrance cleanly across your room.   

Important Safety & Care Rules

• Do Not Light the Wick: Never light the candle with a match or lighter while using the warming lamp.
• Allow to Cool Before Handling: The lamp shade, bulb, and melted wax get very hot during operation. Wait until the wax has fully solidified and the unit has cooled before moving the candle or adjusting the lamp.   
• Refreshing the Fragrance: Candle warmers do not burn away wax like a flame does; instead, the fragrance oils evaporate from the top pool over time. When the scent begins to fade after several uses, allow the wax to solidify, soak up the top thin layer with a cotton pad, or remove the scentless top pool to expose fresh scented wax underneath.   
• Cleaning: Unplug the unit and wipe down the exterior with a soft, slightly damp cloth once completely cool. Avoid harsh chemical cleaners.   

Cherish life’s quiet pleasures with Hideaway Rewards. Earn points as you shop, unlock thoughtful treats, and enjoy exclusive perks. Join us and start today.

Electric Diffuser Safety Guidelines

1. Always Follow Manufacturer Instructions – Read the user manual supplied with your device carefully before first use. Operating capacities, mist settings, and maintenance schedules can vary by model, so always defer to the manufacturer’s specific guidelines.
2. Use the Correct Power Supply & Fill Level – Only use the power cord and adapter supplied with your diffuser. Fill with clean, room-temperature tap or filtered water, and never exceed the maximum (MAX) fill line to prevent leaks and motor strain.
3. Safe Surface & Placement – Place your diffuser on a flat, stable, water-resistant surface away from direct sunlight, heat sources, and edge drops. Position it where mist can disperse freely, keeping it clear of delicate wood furniture, electronics, walls, and out of reach of children and pets.
4. Use Suitable Oils Only – Use high-quality essential oils or water-soluble fragrance oils (typically 3–5 drops per tank). Do not add solid wax melts, carrier oils, or flammable liquids, as these will clog the ultrasonic disc and ruin the internal motor.
5. Unplug Before Moving or Refilling – Always turn off and unplug the diffuser from the power outlet before lifting the lid, topping up with water, or moving it between rooms. Never tilt or carry the unit while the reservoir contains water.
6. Inspect Regularly for Wear – Check the power cord, plug, and outer casing for signs of wear, fraying, or damage before use. Discontinue use immediately if the cable is damaged, the unit overheats, or moisture leaks from the base.
7. Care & Maintenance – Empty unused water when not in use to prevent limescale and bacterial buildup. Unplug and wipe the reservoir clean weekly with a soft cloth and diluted white vinegar, avoiding harsh detergents or submerging the base in water. Ensure all electrical contacts are completely dry before reconnecting.