Enjoying your wax melts Safely

Wax Melts Usage Instructions:

• Remove all packaging and place the wax melt in the well of your melt burner.
• Use with an unscented tealight or an electric burner in accordance with the manufacturer’s instructions.
• Only burn the wax melt on a level, fire resistant surface.
• Do not burn for more than 4 hours at a time.
• When only 1 wax melt remains, its time to buy a more Hideaway Wax Melts!

Safety:

• Do not put fingers or hands into the unit while lit.
• To reduce the risk of injury, keep out of reach of children and pets.
• Do not leave unattended or burning out of sight.
• Place the unit on a level and heat resistant surface away from other heat elements.
• Do not overfill the bowl, you can top up once the wax has melted.
• The burner may become hot, do not touch while in use as heated wax can burn.
• Allow to cool when finished using.
• Do not use metal objects to clean out the wax, this may crack and damage the burner. See changing your wax melts on how is best to do this.
• See label on the wax melts for further health & safety advice.

Wax melt storage:

• Wax melts are sensitive to light and temperature, you can avoid your wax melts from cracking and melting by storing in a cool, dry place away from direct sunlight.
• Keep your wax melts dust free by keeping the extra wax in their back in the sealed packaging dispatched to you in.

Changing your wax melts:

• Historically there are two ways that you can remove your used wax melts in order to start anew. We call it the hot or cold method-or liquid or hard.
• If your warmer has been on and your wax is liquid, take two cotton balls, set them in the warmer tray, let it absorb and discard of the cotton balls. This is perfect for the warmers without removable lids/plugs. Then take a paper towel and wipe away any excess wax
• If your wax warmer is not on and the wax has hardened, we think it is easier to remove it by turning the warmer back on/relighting the tealight for 10-30 seconds so the wax loosens in the dish and is easier to remove as a solid piece. Apply a light amount of pressure to the melt and the melt should pop out in a semi solid form. Be sure to wipe away any excess with a paper towel.

Happy Wax Melting